CUT-TO-LENGTH · STANDARD

Standard Cut-to-Length Line

Simple structure · built to last · easy to run and maintain. Punches, V-notch and shears cut step by step under program control — right for shops with steady batches and few lamination types, priced accordingly.

High volume, frequent changeovers? → See the High-Speed Line

Why plants start here

The 1V·1-hole starter

Limbs and yokes mixed on one machine — many plants’ first line, and a proven export model.

No downgrade in electrics

Same PLC and servo brands and series as the high-speed line. What the standard line saves is moving stations — not electrics.

Same accuracy system

Burr ≤0.02 mm, length ±0.2 mm/2m — one standard across both series, fixed in the technical agreement.

Centre-limb machine available

2V·1-hole centre-limb machine runs beside the main line; all five limb stacks ready together.

Choose your width class

200 — small distribution transformers

Reference build: 2 shears · 2 punch units (SRHJ200-22B class) · 2-head decoiler (Ø1200, 1.5 t/head)

Strip thickness0.18 – 0.30 mm

Strip width50 – 220 mm

Lamination length450 – 1500 mm

Max line speed210 m/min

Length tolerance±0.2 mm / 2 m

Angle tolerance±0.02°

Burr≤0.02 mm

Installed capacity≈42 kW

400 — distribution flagship

Reference build: 2 V-notch · 2 hole punches (SRHJ400-222B class) · 2-head decoiler (max width 420, 2 t/head)

Strip thickness0.18 – 0.30 mm

Strip width50 – 420 mm

Lamination length400 – 2000 mm

Max line speed210 m/min

Length tolerance±0.2 mm / 2 m

Angle tolerance±0.05°

Punch die rangeΦ8 – Φ22 mm

Installed capacity≈60 kVA

600 — large distribution, medium power

Reference build: 1 V-notch · 2 hole punches · 4 corner punches (SRHJ600-212(4)B class) · 2-head decoiler (max width 620, 3 t/head)

Strip thickness0.18 – 0.30 mm

Strip width80 – 620 mm

Lamination length500 – 3000 mm

Max line speed210 m/min

Length tolerance±0.2 mm / 2 m

Angle tolerance±0.05°

Punch die rangeΦ10 – Φ28 mm

Installed capacity≈70 kVA

800 — 110 kV class, four corner punches standard

Reference build: 2 V-notch · 2 hole punches · 4 corner punches (SRHJ800-222(4)B class) · 2-head decoiler (Ø1300, 5 t/head)

Strip thickness0.18 – 0.35 mm

Strip width100 – 820 mm

Lamination length800 – 4500 mm

Max line speed210 m/min

Length tolerance±0.2 mm / 2 m

Angle tolerance±0.02°

Footprint≈10 × 28 m

Installed capacity≈80 kW

1000 – power transformers, one-metre class

Reference build: 2 shears · 2 V-notch · 2 hole punches · 4 corner punches (SRHJ1000-222(4)B class) · 2-head decoiler (Ø1200, 5 t/head)

Strip thickness0.18 – 0.35 mm

Strip width120 – 1020 mm

Lamination length600 – 5000 mm

Max line speed210 m/min

Length tolerance±0.2 mm / 3 m

Angle tolerance±0.02°

Burr≤0.02 mm

Installed capacity≈80 kW

Stack height up to 600 mm · footprint ≈ 32.3 × 8 m · line weight ≈ 45 t.

Coil requirements across all models: width tolerance ±0.1 mm · burr ≤0.02 mm · camber ≤0.2 mm/2m. Knives good for 1,000,000+ cuts per grind. Formal model codes and item-by-item configuration are fixed in the technical agreement. Installed capacity varies with the exact station configuration of each reference build.

Options

Orientation	Left-hand / right-hand line
Decoiler	2-head / 4-head
Hole punches	0 – 4 units · die size to drawing
V-notch	1 / 2 units
Shears	45° + 135° standard; 45° rotating to 90° optional
Stacking tables	1+1 / 3+3 / 5+5 stations
Take-off	Hand cart / RGV (single or multi station)
Servo & controls	Siemens / Rockwell (AB) / Chinese brands
Software	PLS machine terminal (optional) – reads lamination drawings and auto-generates cutting programs

Inside the line

Multi-head decoiler - hydraulic mandrel clamping — Multi-head decoiler – hydraulic mandrel clamping

Shear station - burr under 0.02 mm — Shear station – burr under 0.02 mm

Technical datasheet (PDF)

Two pages: headline specs, full parameters, standard and optional configuration, FAT and service scope. Version Standard-CTL-Line_SRHJ_EN_RevA_2026-08

Download datasheet