Articles · Cut-to-Length Lines
Cut-to-Length Lines
Practical, engineering-level notes from a machine builder: how cut-to-length, slitting and stacking lines work, how to size them, and what the numbers on a datasheet really mean.
Cut-to-Length LinesPeak Speed vs Real Output: How to Estimate Laminations per Hour from a Cut-to-Length LineThe m/min figure on a datasheet is not a production rate. This article gives a simple method to turn strip speed, lamination length and steel thickness into pieces per hour and tonnes per month, with a worked example and the assumptions written out.Cut-to-Length LinesHow to Choose a Cut-to-Length Line Width Class (200 to 1000) for Your Transformer CoresThe width class is the first and most consequential decision when buying a cut-to-length line. Four questions settle it: the widest lamination you build, the holes you punch, the tonnage you run, and the floor you have.Cut-to-Length LinesStandard vs High-Speed Cut-to-Length Lines: When Does High Speed Pay Off?A high-speed line is not simply a standard line with a bigger motor. The strip never stops, the stations move with it, and changeovers are done by program. Here is what that buys you, and the tonnage rule we use to decide.
Sizing a line for your core shop?
Send strip widths, thickness and monthly tonnage. You get a line proposal with knife layout and floor plan, or use the online selector to narrow the series first.
